EDG-4.25
EDG-4.25
and EDG-4.25A crawler draglines are designed on the basis of
EKG-5A
serial crawler shovel . These models are intended for excavation of
mineral products and overburden rock with stacking or loading to transport
facilities at open mine workings. The structural features of these models are as
follows: separate direct current drive of the main mechanisms of
"generator-motor" type; planetary gearboxes of rotary mechanism; motion drive
with continues operation mode, lattice boom, triple - tapered bucket with
ground sticking elimination, availability of model with widened crawler belts;
swinging laying units and head unit; separate hermetic cab with vibroisolated
seat; high unification with
EKG-5A base model.
| Parameters | EDG-4.25А | EDG-4.25 |
| Bucket capacity, m3 | 4 | 4 |
| Boom length, m | 25 | 25 |
| Maximum dumping radius, m | 24,5 | 24,5 |
| Maximum dumping height, m | 8,15 | 8,15 |
| Maximum digging height, m | 15 | 15 |
| Crawler belt width, mm | 1400 | 1100 |
| Maximum end load, kilonewtons | 117,7 | 117,7 |
| Maximum hoisting effort, kilonewtons | 220 | 220 |
| Maximum dragging effort, kilonewtons | 240 | 240 |
| Average unit ground pressure while moving, kPa | 127(1,3) | 154(1,57) |
| Productivity, m3 per hour | 340 | 340 |
| Network motor power, kilowatt | 250 | 250 |
| Mains supply voltage, kilovolt | 6 | 6 |
| Operating weight, tons | 196 | 186 |