|
Crawler
draglines
Electric
shovels
Hydraulic
shovels
Rotary
Drilling Rigs
|
|
ESH 20.90
ESH 20.90 dragline is
a full-revolving machine with hydraulic walking mechanism and working dragline
facilities with 20 m3 bucket and boom length 90 m.
The dragline is designed for stripping overburden in open pit mining (coal,
shale, ferrous and nonferrous metal ores, gold, raw materials for chemical
industry and refractories, etc.) at the ambient temperature from minus 40°C to
plus 40°C. The boom is of three-edged tubular structure with preliminary
cable-braced upper chord. The support frame and the revolving frame having
sections joint with high-strength bolts with factory installed ring gear sectors
and roller disk rails. Hydraulic three-support walking mechanism with two
lifting and two traction cylinders. Lifting and crowd winches with changeable
ring gears of reel block. The swing mechanism with four two-stage gearboxes.
Swing gear and bearing assembly with conical rollers and forged rails. Automatic
lubricating system of swing units and semi-automatic lubrication of mechanisms.
D.c. motor drive of "generator-motor" type with thyristor excitation of
electrical machines.
|
Parameters |
| Bucket capacity, m3 |
20 |
| Boom length, m |
90 |
| Boom angle, deg |
32 |
| Maximum suspended
load, tf |
63 |
| Cycle duration (first category
ground), s |
60 |
| Dumping height, m |
38,5 |
| Digging depth, m |
42,5 |
| Dumping radius, m |
83 |
| Clearance over the frame rear part,
m |
1,61 |
| Resting base
diameter, m |
14,5 |
| Specific ground pressure during
operation and moving, MPa |
0,105/0,24 |
| Walking shoe
dimensions (length and width), m |
13х2,5 |
| Working mass, t |
1690 |
| Hoisting mechanism
capacity, kW |
2 х
1120 |
| Swing mechanism capacity, kW |
4 х 250 |
| Traction mechanism
capacity, kW |
2 х
1120 |
| Motion mechanism capacity, kW |
2х400 |
| Power of mains
motor, kW |
2500 |
| Supply mains voltage, kV |
6 |
| Drive type |
GM
with TE* |
|
* draglines may be
equipped with systems: thyristor converter - motor (TC-M) and direct
frequency converter- induction motor (DFC-IM). |
|
|