|
Parameters |
|
Hardness of drilled rock (M.M.Protod'yakonov
scale) |
6…14 |
|
Drilling depth of vertical well, m not less |
34 |
|
Drilling depth with one rod, m |
17 |
|
Well
diameter in boring head, mm |
270 |
|
Angle of well slope when drilling "away from",
deg |
0; 15; 30 |
|
Rotation speed of drilling column, rpm |
0¼120 |
|
Rated
rotational torque on rotation unit kN*m |
8,4 |
|
Upper
limit of feed force, kN |
350 |
|
Feed
type of drilling tool |
cable, two winches with electric drive and
triple cable-pulley system |
Feed rate , m/ min
drilling/setting |
0…6
0…16 |
|
Method
of dust control |
a) air-water mixture
b) dry |
|
Capacity of compressor unit, m3/min |
38 ±2 |
|
Rated
air pressure in pneumatic system, MPa |
0,5 |
|
Speed of rig horizontal motion, km/h |
1,6 |
|
Maximum
climbing angle on hard soil, deg |
12 |
Average
ground pressure during moving, MPa, not over
crawler belts
jacks |
0,15
0,9 |
|
Energy supply |
by flexible cable |
|
Capacity of cable reel, m, not less |
630 |
Supply
voltage, V
50 Hz, 3-phase |
6000 |
Dimensions of rig, mm: width
length with raised tower
length with lowered tower
height with raised tower
length with lowered tower |
6286
12 780
25 460
27 034
6516 |
|
Mass of rig, t |
141 |